Make your own free website on

1/2 in. MagnumŪ Dual Torque Hammer-Drill, 0-1000/0-2500 RPM Kit with Case and Bits





1/2 inch capacity, 5.5 amp motor
Trigger speed control in two ranges: 0-1000 rpm, 0-20,000 bpm, 0-2500 rpm, 0-50,000 bpm, reversing
Removable brush cartridge-change brushes in less than one minute
3-wire Quik-LokŪ detachable cord

120 AC
 No Load Speed
0-1,000/0-2,500 RPM
 No Load BPM
 Chuck Type
 Cord Type
8 ft. Quik-Lok
 Trigger Lock
 Capacity in Steel
1/2 in.
 Capacity in Concrete
5/8 in./1/2 in.
 Selfeed Bit Capacity
1-1/8 in.
13 in.
 Tool Weight
5.8 lbs.
 Shipping Weight
15.3 lbs.

4 piece bit set

For small hole drilling up to 1/2 inch the MILWAUKEE MagnumŪ Hammer-Drill is all the tool you'll need. Lightweight, at 5-3/4 pounds, this tool is ideal for use overhead. With two modes of operation, rotation with hammering and rotation only, this versatile tool can be used for drilling in steel, wood or concrete. Use rotation only for drilling in steel and wood. Use rotation with hammering when drilling in concrete. Dual range speed control allows the operator to choose higher speed with lower torque or slower speed and more torque depending on the size and type of the fastener or bit and the material being drilled. This tool can be used to drive concrete screw fasteners used in many installation operations. The Hammer-Drill offers a unique brush cartridge system, storing spare carbon brushes in the handle of the tool. Only a screwdriver is needed to replace worn brushes. The tool is back on the job in minutes. Equipped with an exclusive Milwaukee Quik-LokŪ cord, the cord can be removed for tangle free carrying and storage. It also allows for fast field replacement of worn cord sets. Simply twist and pull off the worn cord and push and twist on the new cord.



Home   -   About Culpepper Electric   -   Milwaukee Tools   -   Klein Tools   -   Other Products   -   Contact Us