FEATURES
	Single motion bit insertion
	Stop rotation mode for chipping and self drilling anchors
	1-1/2 in. solid bit capacity, 6 in. thin wall core bit capacity
	385 rpm, 3,400 bpm
	Powerful 11.0 amp motor with Electronic Feedback Control Circuit
	Extra large steel case holds 23 inch long bits

SPECIFICATIONS
Voltage	120 AC Only
Amps	11.0
No Load Speed	385 RPM
No Load BPM	3,400
Blow Energy	7.9 ft.-lbs.
Cord Type	9 ft. Fixed
Drilling Mode	Hammer with Rotation & Hammer Only
Handle Style	D-Handle
Vibration Reduction	No
Electronic Feedback	Yes
Clutch	Yes
Solid Bit Capacity	1-1/2 in.
Thick Wall Core Bit Capacity	4 in.
Length	17-1/2 in.
Tool Weight	13.8 lbs.
Shipping Weight	26.0 lbs.

This 1-1/2 in. rotary hammer delivers the same outstanding drilling performance as the fully featured models but with fewer features at a lower price. A soft-shift stop rotation knob permits the operator to smoothly change from hammer-with-rotation mode to the hammer-only mode. An 11.0 amp motor combined with an electronic feedback control circuit allows a full 6 inch thin wall Core Bit to be driven through 5000 PSI concrete without bogging down. The bit locking system features one-handed click-in bit insertion. A pre-set clutch protects against sudden motor overloads. This versatile tool can be used for drilling up to 1-1/2 inch holes in concrete with SDS-max Bits, larger holes in concrete with Core Bits or the LHS system, or used for chipping, chiseling and demolition.