FEATURES
	Patented Vibration Isolation System (both grips)
	Single motion bit insertion and positionable chisel lock
	1-1/2 in. bit capacity, 6 in. thin wall core bit capacity
	Dial speed control: 190-385 rpm, 1700-3400 bpm
	Powerful 11.0 amp motor with Electronic Feedback Control Circuit

SPECIFICATIONS
Voltage	120 AC Only
Amps	11.0
No Load Speed	190/385 RPM
No Load BPM	1,700/3,400
Blow Energy	7.9 ft.-lbs.
Cord Type	10 ft. Quik-Lok
Drilling Mode	Hammer with Rotation & Hammer Only
Handle Style	D-Handle
Vibration Reduction	Yes
Electronic Feedback	Yes
Clutch	Yes
Solid Bit Capacity	1-1/2 in.
Thick Wall Core Bit Capacity	4 in.
Length	17-1/2 in.
Tool Weight	14.2 lbs.
Shipping Weight	26.4 lbs.

These new 1-1/2 in. rotary hammers deliver outstanding drilling performance in a lightweight package. Milwaukee's patented vibration isolation system greatly reduces operator fatigue by absorbing the hammering action with floating handles. A soft-shift stop rotation knob permits the operator to smoothly change from hammer-with-rotation mode to the hammer-only mode. An 11.0 amp motor combined with an electronic feedback control circuit allows a full 6 inch thin wall Core Bit to be driven through 5000 PSI concrete without bogging down. The on-off switch is coupled with a speed dial so that the speed and blow energy can be correctly matched to the application or accessory. The bit locking system features one-handed click-in bit insertion. The Quik-Lok® cord allows for fast twist-off, twist-on cord replacement. A pre-set clutch protects against sudden motor overloads. The service reminder light indicates when the carbon brushes will soon need to be replaced. This versatile tool can be used for drilling up to 1-1/2 inch holes in concrete with SDS-max Bits, larger holes in concrete with Core Bits or the LHS system, or used for chipping, chiseling and demolition.