FEATURES
	Double Insulated construction with 2 wire cord
	1-1/8 in. solid bit capacity, 3-1/2 in. thin wall core bit capacity in concrete or 4 in. capacity in masonry block
	Variable speed: 0-980 rpm, 0-4,200 bpm
	Powerful 7.4 amp motor provides power for a hard-hitting 2.5 ft.-lbs. of energy per blow
	Three modes of operation: rotation with hammering, hammer-only and rotation-only. This versatile tool can be used for drilling in steel, wood or concrete. Use rotation-only for drilling in steel and wood with optional chuck and adapter. Use rotation with hammering when drilling in concrete. Use hammer-only for light chipping work.
	Speed control switch allows operator controlled starts for less bit walk resulting in more accurate hole positioning
	Lightweight, compact 14 in. length and well balanced design
	Quick-change removable bit holder for optional 3-jaw chuck

SPECIFICATIONS
Voltage	120 AC
Amps	7.4
No Load Speed	0-980 RPM
No Load BPM	0-4,200
Blow Energy	2.5 ft.-lbs.
Cord Type	10 ft. Fixed
Drilling Mode	Hammer with Rotation & Rotation Only
Handle Style	D-Handle
Vibration Reduction	Yes
Clutch	Yes
Solid Bit Capacity	1-1/8 in.
Thin Wall Core Bit Capacity	4 in.
Length	13-1/3 in.
Tool Weight	8.7 lbs.
Shipping Weight	15.0 lbs.

INCLUDES
	Carrying Case

This 3-mode double insulted hammer is great for mid-size hole drilling (up to 1-1/8 in. diameter) in concrete. The D-style rear handle offers the operator a secure comfortable grip and a two-finger speed control trigger switch. Speed control allows smooth controlled starts and less bit walk for accurate hole positioning. The hammer accepts SDS style bits up to 1-1/8 in. diameter. It can drill with up to 3-1/2 in. holes in concrete using thin wall Core Bits. A hammer-only mode allows this tool to be used for light chipping work. A slip clutch stops rotary action when a bit jams protecting the mechanism from overload. The tool can be set for a rotation-only mode and the quick-change chuck system allows the operator to change from SDS-Plus to a 3-jaw keyed chuck.